The BIO-CYCLONE aerobic cyclone is made of ultra-high molecular weight polymer, which has a high tolerance to general acidic and alkaline environments. High flow compressed air is directly sent into the gas-liquid mixer through a small caliber air supply pipe, and after passing through the guide plate, it forms a spiral upward airflow that meets the wedge-shaped material in the mixer and is crushed to form fine bubbles. The fine bubbles are then fully mixed with the sucked liquid in the mixing chamber, forming a spiral spray out of the gas-liquid mixer and forming a strong circulating flow around the gas-liquid mixer, increasing the retention time of the micro bubbles in water. This greatly improves the utilization rate of oxygen, and achieves the optimal mixing state of the incoming air and activated sludge in the tank. The longest retention time.

Structural advantages

1. Double nozzle single spiral structure

There is no obstruction from the cross blade swirl generator, so it is less suitable to block than a single nozzle double spiral structure swirl generator. Moreover, due to the non left-right diversion of the intake, the energy and oxygen utilization efficiency of the swirl impact are better than other swirl aerators

2. Integrated mold opening, different from other cyclone separation structures, without moving parts, stable structure;

3. The mixed liquid flows through a large-diameter cylinder without blockage and requires less maintenance;

Material advantages

Ultra high molecular weight polymer: Its extremely high molecular weight endows it with excellent performance, including wear resistance, impact resistance, self-lubricating, corrosion resistance, absorption of impact energy, low temperature resistance, less adhesion, less water absorption, and low density. It can improve its service life and effectively delay the scaling and blockage of special water quality aerators.